Tektronix AD007 Uživatelský manuál stáhnout pdf (Strana 33)

Getting Started

AD007 User Manual

4. Locate the reset button on the bot tom of the ada p ter. (For the

location of the reset button, see Figure 11 on page 48.)

5. Using a small tool or end of a paper clip, momentarily push in the

reset button. This action bypasses the DHCP address request and

loads the last known IP address. (For a new adapter, the last

known address is the factory default IP address of 192.168.1.1.)

6. When the LAN-Link indicator turns from amber to green, the

AD007 adapter has successfully loaded the IP address.

NOTE. A static setup on the network requires that you are connected

through an Ethernet Hub to the same sub-network as the adapter.

7. Connect the RJ-45 adapter to the proper network outlet

(sub-network).

NOTE. If your Internet web browser is configured to use the dialup

adapter, go into the Internet configuration dialog and change the

browser to use the local network. For more information, refer to the

documentation for your particular system.

8. In Windows, open the Net work Properties window by right-click-

ing on the Network icon in the Control Panel. (In Windows NT,

select the Protocols tab.)

9. If TCP/IP is not listed as one of the protocols, you must install it

from the Windows OS CD-ROM disc.

10. Highlight the TCP/IP and click on Properties. This opens the

TCP/IP properties dialog box.

11. Click on all the tabs and write down all the settings. This allows

you to restore them l ater.

12. Set the IP address of the PC to work with the currently configured

settings of the adapter, or use the following settings that will

work with the factory default settings of the AD007 adapter. (You

mayhavetoclickonSpecifyanIPaddress.)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 87 88

Žádné komentáře

Tektronix AD007 Uživatelský manuál Strana 33