Tektronix DPO4000 Uživatelský manuál Strana 283

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 585
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 282
Commands Listed in Alphabetical Order
Conditions
This command re
quires a DPO4PWR application module.
Group
Power
Syntax
POWer:QUALity:DISplay:IRMS {OFF|ON|0|1 }
POWer:QUALity:DISplay:IRMS ?
Arguments
OFF or 0 turns off the rms current display.
ON or 1 turns on the rms current display.
Examples
POWER:QUALITY:DISPLAY:IRMS 1 turns on the rms current display.
POWER:QUALITY:DISPLAY:IRMS ? might return
:POWER:QUALITY:DISPLAY:IRM S 0 indicating that the rms current display
is off.
POWer:QUALity:DISplay:PHASEangle
Sets or returns the display state for the phase angle readout.
Conditions
This command requires a DPO4PWR application module.
Group
Power
Syntax
POWer:QUALity:DISplay:PHAS Eangle {OFF|ON|0|1}
POWer:QUALity:DISplay:PHAS Eangle?
Arguments
OFF or 0 turns off the phase angle display.
ON or 1 turns on the phase angle display.
Examples
POWER:QUALITY:DISPLAY:PHAS EANGLE 1 turns on the phase angle display.
POWER:QUALITY:DISPLAY:PHAS EANGLE? might return
:POWER:QUALITY:DISPLAY:PHA SEANGLE 0 indicating that the
phase angle display is off.
POWer:QUALity:DISplay:POWERFACtor
Sets or returns the display state forthepowerfactorreadout.
MSO4000 and DPO4000 Series Programmer Manual 2-273
Zobrazit stránku 282
1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 584 585

Komentáře k této Příručce

Žádné komentáře