Tektronix DPO4000 Uživatelský manuál Strana 409

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 585
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 408
Commands Listed in Alphabetical Order
Arguments
LESSThan sets t
he oscilloscope to trigger when the data is less than the qualier
value.
Than sets the oscilloscope to trigger when the data is than the qualier value.
EQUal sets the oscilloscope to trigger when the data is equal to the qualier value.
UNEQual sets the oscilloscope to trigger when the data is not equal to the qualier
value.
LESSEQual sets the oscilloscope to trigger when the data is less than o r equal
to the qualier value.
EQual sets the oscilloscope to trigger when the data is than or equal to the
qualier value.
Examples
TRIGGER:A:BUS:B1:CAN:DATA: QUALIFIER LESSTHAN sets the oscilloscope
to trigger when the data is less than the qualier value.
TRIGGER:A:BUS:B1:CAN:DATA: QUALIFIER? might return
:TRIGGER:A:BUS:B1:CAN:DATA :QUALIFIER THAN, indicating that the
oscilloscope is set to trigger when the data is than the qualier value.
TRIGger:A:BUS:B<x>:CAN:DATa:SIZe
Sets or returns the length of the data string in bytes for a CAN trigger if the
condition is DATA or IDANDDATA. Applies to bus <x>, where x is the bus
number.
Co
nditions
This command requires a DPO4AUTO applic ation module.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:CAN:DAT a:SIZe <NR1>
TRIGger:A:BUS:B<x>:CAN:DAT a:SIZe?
Arguments
<NR1> is the length of the data string in bytes.
TRIGger:A:BUS:B<x>:CAN:DATa:VALue
Sets or returns the binary data string to be used for a CAN trigger if the trigger
condition is ID o r IDANDDATA. Applies to bus <x>, where x is the bus number.
Conditions
This command requires a DPO4AUTO applic ation module.
MSO4000 and DPO4000 Series Programmer Manual 2-399
Zobrazit stránku 408
1 2 ... 404 405 406 407 408 409 410 411 412 413 414 ... 584 585

Komentáře k této Příručce

Žádné komentáře